Vietnam Ceramic & Porcelain Mosaic Tile Manufacturer | OEM Cutting
Vietnam Ceramic & Porcelain Mosaic Tile Manufacturer – Custom OEM Processing
Custom Ceramic and Porcelain Mosaic Fabrication in Vietnam
THỦ ĐÔ STONE is a Vietnam-based tile processing factory that fabricates ceramic and porcelain mosaic chips from suitable tile materials. Our principal facility is located in Thanh Oai, Hanoi, and we welcome made-to-drawing orders from international tile distributors, sourcing companies and decorative material brands.
Our service focuses on cutting, shaping and assembling mosaic products to customer specifications.
We do not describe this processing service as raw-clay ceramic tile manufacturing. Instead, the production process starts with suitable existing tile material and transforms it into smaller mosaic components.
Ceramic Versus Porcelain Mosaic Materials
Ceramic and porcelain tiles differ in material properties and manufacturing characteristics.
For custom mosaic fabrication, these differences can affect cutting behavior, edge quality and suitability for small chip dimensions.
Buyers should identify the exact tile material, thickness and surface finish before production.
For porcelain products, particular attention may be required when cutting small or complex shapes.
Standard and Custom Mosaic Chip Dimensions
Common reference dimensions include:
| Chip Size | Typical Design Application |
|---|---|
| 50 × 50 mm | Square mosaic layouts |
| 50 × 100 mm | Rectangular mosaic patterns |
| 50 × 150 mm | Extended rectangular designs |
| 50 × 200 mm | Linear and modular mosaic patterns |
| 100 × 200 mm | Larger-format decorative arrangements |
Custom dimensions can be reviewed according to the supplied material and drawing.
The factory can also assess geometric or irregular chip shapes where technically feasible.
CNC Cutting for Custom Mosaic Designs
THỦ ĐÔ STONE operates CNC waterjet equipment, including 3-axis and 5-axis systems.
This enables technical evaluation of non-standard mosaic shapes, curved profiles and complex patterns.
For projects involving many unique chip geometries, a complete DXF or CAD layout is recommended.
The drawing should identify each chip shape and the required quantity.
Mesh-Mounted Mosaic Sheet Production
Mosaic chips may be assembled into sheets according to a specified pattern.
Important design parameters include:
- Chip dimensions.
- Joint width.
- Overall sheet dimensions.
- Edge alignment.
- Pattern repeat.
- Mesh backing requirements.
- Sheet identification and packaging.
A nominal 2 mm joint and approximately 300 × 300 mm sheet may be used as design references, but these dimensions must be checked against the actual layout.
A sheet should not be approved for production until its chip geometry and joint arrangement have been verified.
Why Geometric Accuracy Matters
For modular mosaics, small errors can accumulate across multiple sheets.
For example, a design that fits one sheet may fail to align when installed next to another sheet.
Therefore, sheet-to-sheet continuity should be considered during the drawing stage rather than only during final assembly.
OEM Orders for International Tile Brands
International buyers can provide their own product designs, color requirements and specifications.
A typical inquiry should include the material, chip size, sheet dimensions, joint spacing, quantity and desired finish.
For custom products, technical evaluation and any necessary sampling should precede a confirmed production order.
Frequently Asked Questions
Can you cut porcelain tiles into custom mosaic chips?
Yes. Suitable porcelain materials can be assessed for custom cutting.
Can we order rectangular mosaic chips?
Yes. Rectangular formats can be evaluated according to the requested dimensions.
Can custom mosaic sheets use 2 mm joints?
A 2 mm joint specification can be considered, subject to verification of the complete sheet geometry.
Do you manufacture porcelain tiles from raw materials?
The service described here is fabrication and processing of existing ceramic or porcelain tiles.
Can we submit our own mosaic pattern?
Yes. CAD or DXF drawings are recommended for accurate technical evaluation.
Related Services
Explore custom CNC mosaic tile processing and our Vietnam mosaic tile and stone OEM factory overview.
Request a Ceramic Mosaic Quotation
Send your tile specifications, chip dimensions, joint width, sheet layout and order quantities.
THỦ ĐÔ STONE – CNC Stone & Tile Cutting Factory
Factory Address: Thanh Oai Industrial Cluster, Bich Hoa, Thanh Oai, Hanoi, Vietnam.
Phone: +84 981 002 236
Zalo: +84 981 002 236
WhatsApp: +84 981 002 236
WeChat: 0918718386
Website: https://gachmosaic.net.vn
Communication Notice
Our team communicates in Vietnamese. If you do not speak Vietnamese, please contact us by text message first through Zalo, WhatsApp, or WeChat. This allows us to translate your requirements and discuss technical specifications accurately.